BumperFlex™ Tape is a highly resilient flexible polyurethane based tape coated with an aggressive pressure sensitive adhesive. This tough, yet durable material is ideal for preventing squeaks & rattles. It also offers protection against scratches and is the perfect way to create a non-slip base over a large area due to it’s high coefficient of friction.
BumperFlex™ Tape protective tapes are supplied on a roll with a thick backing paper suitable for die-cutting into roll form for automated applications. A BumperFlex™ Tape feature is that it’s easily die cut into pads, discs, washers, gaskets or squares to suit almost any job.
Technical Information
Polyurethane Physical Properties
| Property | Test Method | Transparent | Coloured | |||
| Hardness (shore A) | ASTN D-2240 | 68-76 | 68-76 | |||
| Tensile Strength (Mpa) | BS903 | 2.7 MN/m2 | 2.9 MN/m2 | |||
| Elongation (%) | BS903 | 126% | 160% | |||
| Tear Strength (KN/m) | BS903 | 11.5 kN/m | 13 kN/m | |||
| Abrasion Resistance | BS EN 5470-1:1999 | 175 | 160 | |||
| Load Tolerance 21°c to 60° | Min 3 MPa | Min 3 MPa | ||||
| Flame Retardancy | UL94HB | Pass | Pass | |||
| Kinetic coefficient of friction | ASTM D-1894-78 |  |
||||
| A. Stainless Steel B. Glass D. High impact polystyrene |
5.69 2.9 2.53 |
|||||
| Compression Set 40°c (%) | BS903 | Max 5 | Max 5 | |||
| Slitting tolerance - + 0.5mm | Thickness tolerance - + 0.5% | Shelf Life - 12 months when stored in original packaging at room temperature | ||||
Adhesive Data
| 6000 Series Rubber Adhesive The 6000 series adhesive is an aggressive high tack adhesive system, which displays good instant tack, high peel and shear properties. |
||||||
| 4000 Series Acrylic Adhesive This is an adhesive with good shear strength and a higher end use temperature. Usually preferred for applications where good ageing properties are a required feature. |
||||||
| Properties | 6000 Series | 4000 Series | ||||
| Adhesive Characteristics | System Thickness Backing Liner |
Solvent Rubber 0.002 120 gsm paper |
Solvent Acrylic 0.002 120 gsm paper |
|||
| Adhesive Performance | Shear Strength @ 21°C Shear Strength @ 49°C |
Excellent Excellent |
Excellent Excellent |
|||
| Application Temperature | 15°C to 55°C | 10°C to 60°C | ||||
| End Use Temperature | -10°C to 65°C | -20°C to 70°C | ||||
Applying BumperFlex
It is important to remember, that as with any self adhesive product, the surface to which they are being applied must be clean, dry and free from dust and dirt. Therefore, to gain maximum adhesion, clean the surface with low strength solvent and allow to dry thoroughly before use. Please follow solvent manufacturers’ instructions for safety. The information provided above have been gained under laboratory conditions. It is important customers test BumperFlex™ Tape themselves to ensure suitability for intended applications.
All BumperFlex™ Tapes are RoHS and Wee compliant.